Artnet DMX controller For DMX RGB led pixel/strips

                 

  Art-Net Node 2/4/8 and 16 DMX Universes System




Product Features
n Colordreamer Titan converts Art-Net data from ethernet network to DMX512.
n Colordreamer Titan Family Artnet Controller has 2Universes (Titan A2), 4Universes (Titan A4), 8 universes (Titan A8) and 16 universes (Titan A16) available.
n Perfect synchronization between each universe.
n Colordreamer Titan offers powerful features, especially in combination with
Colordreamer software.
n Take full advantage of pixel mapping and voxel mapping, easy to install.
n The device is ready within seconds after start-up. An HTP Merge is automatically available for two Art-Net sources. If required, you can access and change specific device settings using the built-in web configuration tool.
Specification
Model
Titan A2
Titan A4
Titan A8
Titan A16
Power Input
100-240VAC
50/60Hz
100-240VAC
50/60Hz
100-240VAC
50/60Hz
100-240VAC
50/60Hz
Input Protocol
ARTNET
ARTNET
ARTNET
ARTNET
Output Protocol
DMX512
DMX512
DMX512
DMX512
Refresh Rate
40Fps
40Fps
40Fps
40Fps
Defaulty IP
192.168.1.100
192.168.1.100
192.168.1.100
192.168.1.100
Defaulty Subnet
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Cable
Net cable
Net cable
Net cable
Net cable
DMX512(Out)
2X512 channels
4X512 channels
8X512
channels
16X512 channels
Ethernet Port
RJ45
RJ45/Fiber
RJ45
RJ45
DMX512 Ports
3Pin/5Pin XLR female
3Pin/5Pin XLR female
3Pin/5Pin XLR female
3Pin/5Pin XLR female
Housing
Silver Metal
Black Metal
Black Metal
Black Metal
IP
IP20
IP20
IP20
IP20
Dimension
(body)
115x63x38mm
117.6x92.8x38mm
440x136.6x44mm
440x136.6x44mm
Dimension
(with brackets)

brackets)mm
140x63x38mm
137.6x92.8x38mm
483x136.6x44mm
483x136.6x44mm
Certificate
CE
CE
CE
CE


3-Pin and 5-Pin XLR Connector Layout

 Learn more please contact Me. 
Jessie
Email:jessie@witop-tech.com
Phone:0086+15676178187


评论

发表评论

此博客中的热门博文

Ws2813 RGB Led Chip Data sheet

图片
Shenzhen Witop technology Co,.Ltd www.witop-tech.com                  Ws2813 RGB Led Chip                     Features and Benefits 1、 The control circuit and the LED share the only power source. 2、 The control circuit and RGB chip are integrated in a 5050 components, to form an external control pixel. 3、 Using the built-in signal reshaping circuit to achieve the signal waveform shaping, and no distortion of waveform of signal takes place. 4、 Built-in power-on reset and brown-out reset circuits. 5、 The gray levels of each pixel are of 256 levels, which achieves “256*256*256=16777216” full-color display, and the refresh frequency reaches to 2KHz/s. 6、 Serial cascade interface, data receiving and decoding depend on just one signal line. 7、 Dual-signal wires version, signal break-point continuous transmission. 8、 Any two point the distance more than 3m transmission signal without any increase circuit. 9、 When the refresh rate is 30fps, cascade numbers are far more tha
阅读全文

RGBW VS RGBWW RGB VS RGBW

图片
Add:3/F,Building A,Jinmao Technology Park,Tangyanshan lndustrial Zone Tangkeng,Shiyan,BaoanDistrict,Shenzhen Email:jessie@witop-tech.com  phone:0086+15676178187 RGBW  VS RGBWW RGBW LED strip has been around for a while now and has opened the door to previously unheard-of lighting possibilities, allowing not only a wide range of customisable colors but also the ability to cut and join any length to create totally unique shapes. In response to popular demand though, there's now a new kid on the block, RGB+WW, which adds an extra white chip into the mix. Why might you need this? Read on.. What’s the difference between RGBW and RGBWW LED strip? Standard RGBW LED strip uses a 4-in-1 LED chip made up of red, green,blue and W chips. It can produce a wide range of colors by mixing the four  and looks almost white with all  at full brightness. RGB+W+W LED strip uses either a 5-in-1 LED chip that has A Warm white chip and RGB Led, also has a White color on the right.
阅读全文

K-1000C SD card controller

图片
Email：jessie@witop-tech.com                    phone:0086+15676178187  Tel:0086+0755-23081280 WTP -K-1000C Using Manual 一、 K-1000C system features: 1000C SD Card Controller K-1000C system features: 1 、 32 to 65536 degree Gray control, Gamma correction procession handle. 2 、 Support various point, line light source, and all kinds of rules and specific shaped  h andle. 3. The controller has one output port, can support up to 512/2048 pixels(DMX lighting support   up to 512 pixels). 4 、 Play content stored in the SD card , the SD card can store up to 32 effects File, SD card   capacity support 128MB-32GB. 5 、 The controller can single set use,also multiple controllers cascade, cascade optical   isolation mode: interference, better stability, cascade distance between two controllers can   reach up to 150 meters, need to use 0.5M² pure copper power cord. 6 、 The controller support chip can lock the support IC in software, or not lock the support   IC in the software, sele
阅读全文